Specialty Saws

  • Specially designed toothing for quick clean cuts in drywall and plasterboard.
  • Thicker handle gives a non-slip grip for extra sawing power.
  • The index finger can be rested along the side of the handle for better control.
  • Designed handle allows the back of the saw to be used for marking 45° and 90°.
  • International standard hardened saw teeth.
  • Hard & smooth saw blade coating: hardness up to 4H-5H. Low Friction = Fast Cut = Durability.

Model no.
Description
TPI
Pack Type
Inner
Outer
NW(kg)
GW(kg)
cuft
WPS22-3E10
550 mm (22") Plaster Saw
7
Saw Guard
12
48
26.00
28.00
4.07

 

  • TRT FineLine Technology diamond-grinding on 3 cutting edges with ultra-sharp.
  • International standard hardened saw teeth.
  • Blade shape gives better cutting control for cutting the right angle.
  • Thicker handle gives a non-slip grip for extra sawing power.
  • The index finger can be rested along the side of the handle for better control.
  • Designed handle allows the back of the saw to be used for marking 45° and 90°.
  • Hard & smooth saw blade coating: hardness up to 4H-5H. Low Friction = Fast Cut = Durability.

Model no.
Description
TPI
Pack Type
Inner
Outer
NW(kg)
GW(kg)
cuft
WMS20-3E10
500 mm (20") Miter Handsaw
11
Saw Guard
12
48
24.00
26.49
3.53

 

  • TRT FineLine Technology diamond-grinding on 2+3 cutting edges with ultra-sharp.
  • International standard hardened saw teeth.
  • High quality steel saw blade cuts on both the push and pull stroke.
  • Thicker handle gives a non-slip grip for extra sawing power.
  • The index finger can be rested along the side of the handle for better control.
  • Saw blade end curved with reverse tooth to allow user easy start into floorboards and underfloor cavities.
  • Hard & smooth saw blade coating: hardness up to 4H-5H. Low Friction = Fast Cut = Durability.

Model no.
Description
TPI
Pack Type
Inner
Outer
NW(kg)
GW(kg)
cuft
V1212-3E07
300 mm (12") Veneer Saw
11
Color Sleeve
12
48
14.40
15.50
2.66

 

  • TRT FineLine Technology diamond-grinding on 3 cutting edges with ultra-sharp.
  • The index finger can be rested along the side of the handle for better control.
  • Japanese standard impulse hardened saw teeth.

Model no.
Description
TPI
Pack Type
Inner
Outer
NW(kg)
GW(kg)
cuft
K1212-3E10
300 mm (12") Keyhole Saw
11
Color Sleeve
12
48
8.08
9.00
1.97

 

  • Designed for cutting holes in plasterboards, chipboards or hardboards.
  • Sharpened point at the tip of the saw blade.
  • TRT FineLine Technology diamond-grinding on 3 cutting edges with ultra-sharp.

Model no.
Description
TPI
Pack Type
Inner
Outer
NW(kg)
GW(kg)
cuft
D0906-3E16
150 mm (6") Drywall Saw
8
Color Sleeve
24
48
6.64
7.22
1.04